1 × 8 1 * 8 1:8 Nooca tuubada yar ee PLC fiber optic splitter

1×8 1*8 1:8 Nooca tuubada yar ee PLC fiber optic kala qaybiyaha Sawirka Featured

Sharaxaad Gaaban:

• Lumis gelinta oo hooseysa, khasaaro soo celin oo sare

• Xasillooni Heerkul oo Aad u Fiican

• Ku celcelin wanaagsan iyo is-weydaarsi wanaagsan

• Adkaysi farsamo oo heer sare ah

• Waqti adag oo lagu daawayn karo iyo xakamaynta heerkulka

• Heerarka tijaabada adag iyo hababka tayada

• Ilaalinta deegaanka (U hoggaansanaanta ROHS)

• Fiilada balastar-ka ee fiber-ka ah waxaa loo habeyn karaa iyadoo loo eegayo shuruudaha gaarka ah ee macaamiisha (Xidhiidhiyaha Gaarka ah/Dhererka/ xirmada…)

Noo soo dir emayl

Faahfaahinta Badeecada

Calaamadaha Alaabta

Sharaxaadda Badeecada:

•Kala-qaybiyaha fiber optic-ga ee PLC wuxuu ku salaysan yahay tignoolajiyada wareegga iftiinka ee toosan iyo habka isku-hagaajinta saxda ah, wuxuu u qaybin karaa hal/laba gelinta indhaha ah wax soo saar badan oo indhaha ah si isku mid ah waxaana loo calaamadeeyay 1*N ama 2*N.

•Kala-qaybiyaha fiber optic-ga ee PLC waa nooc ka mid ah qalabka maaraynta awoodda indhaha kaas oo lagu sameeyay tiknoolajiyada hagaha hirarka indhaha ee silica.

•Waxay leedahay cabbir yar, isku hallayn sare, baaxad ballaaran oo hirarka hawlgalka ah iyo isku midnimo wanaagsan oo kanaalka-ilaa-kanaalka ah, waxaana si weyn loogu isticmaalaa shabakadaha PON si loo xaqiijiyo kala qaybsanaanta awoodda calaamadaha indhaha.

•Kala-qaybiyaha fiber optic-ga ee PLC wuxuu bixiyaa waxqabad sare oo indhaha ah, xasillooni sare iyo isku hallayn sare, wuxuu buuxiyaa shuruudaha kala duwan ee codsiyada deegaanno kala duwan.

•Kala-qaybiyaha fiber optic-ga ee 1x8 PLC wuxuu la socdaa 1 gelin iyo 8 wax-soo-saar. Dhererka fiilada gelinta iyo soo-saarku wuxuu noqon karaa 0.6m, 1.0m, 1.5m ama waa la habeeyey. Waxaa laga heli karaa noocyo badan oo isku xireyaal ah sida: SC/UPC, SC/APC, LC/UPC, LC/APC,

•Kala-qaybiyaha fiber optic-ga ee 1x8 PLC waxaa si ballaaran loogu isticmaalaa sanduuqa rack-ka ee 8 dekedood si loogu isticmaalo qaab-dhismeedka qaybinta, ama sidoo kale si ballaaran ayaa loogu isticmaalaa 8 dekedood sanduuqa qaybinta fiber optic-ga ee dibadda.

Codsiga:

•Shabakadaha FTTX

•Shabakadaha PON

•Xiriirada CATV

•Isgaarsiinta Xogta

•Isgaarsiinta

•Qaybinta Calaamadaha Indhaha

Sifo:

•Lumis gelinta oo hooseysa, khasaaro soo celin sare

•Xasiloonida Heerkulka Aad u Fiican

•Ku celcelin wanaagsan iyo is-weydaarsi

•Adkeysi farsamo oo heer sare ah

•Waqti adag oo lagu daweeyo iyo xakamaynta heerkulka

•Heerarka tijaabada adag iyo hababka tayada

•Ilaalinta deegaanka (U hoggaansanaanta ROHS)

•Xadhka balastar ee fiber-ka ah waxaa loo habeyn karaa iyadoo loo eegayo shuruudaha gaarka ah ee macaamiisha (Xidhiidhiyaha Gaarka ah/Dhererka/ xirmo...)

Halbeegga:

Qaabeynta Dekadda	1 * 8
Lumista Gelinta (dB) Ugu badnaan	10.6
Midnimada Lumitaanka (dB)	1.0
PDL(dB)	0.25
Lumis Ku-tiirsanaanta Mowjadda (dB)	0.3
Lumis Ku-tiirsanaan Heerkulka (-40~85) (dB)	0.4

Fiiro gaar ah: Halbeegga kore waa kala-qaybiyaha aan lahayn isku xiraha.

Qaabeynta Dekadda	1 * 8
Lumista Gelinta (dB) Ugu badnaan	10.8
Midnimada Lumitaanka (dB)	1.0
PDL(dB)	0.2
Lumis Ku-tiirsanaanta Mowjadda (dB)	0.3
Lumis Ku-tiirsanaan Heerkulka (-40~85°C) (dB)	0.4

Fiiro gaar ah: Halbeegga kore waa kala-qaybiyaha leh isku xidhaha.

Qiimaynta Ugu Badan ee Dhabta ah

Halbeegga		Astaan	Ugu yaraan.	Caadi ah	Ugu badnaan.	Cutubka
Heerkulka Kaydinta		T_S	-40		+85	°C
Heerkulka Hawlgalka Kiis	SFP+ -10G-LR	T_A	0		70	°C
Heerkulka Hawlgalka Kiis	SFP+ -10G-LR-I	T_A	-40		+85	°C
Danabka ugu Badan ee Sahayda		Vcc	-0.5		4	V
Qoyaanka Qaraabada ah		RH	0		85	%

Astaamaha Korontada (KOR = 0 ilaa 70 °C, VCC = 3.135 ilaa 3.465 Volts)

Halbeegga	Astaan	Ugu yaraan.	Caadi ah	Ugu badnaan.	Cutubka	Fiiro gaar ah
Danab Bixinta	Vcc	3.135		3.465	V
Hadda Bixinta	Icc			430	mA
Isticmaalka Awoodda	P			1.5	W
Qaybta Gudbiyaha:
Impedance kala duwanaanshaha gelinta	R_in		100		Ω	1
Dulqaadka Danabka DC ee Hal-Dhammaad ah ee gelinta Tx (Tixraaca VeeT)	V	-0.3		4	V
Kala duwanaanshaha danab aqbasho	Vin,pp	180		700	mV	2
Gudbi Danab Jooji	V_D	2		Vcc	V	3
Gudbi Daar Danab	V_EN	Vee		Vee+0.8	V
Qaybta Qaataha:
Dulqaadka Danabka Soo-saarka ee Keliya ee Dhammaada	V	-0.3		4	V
Danabka Kala-soocidda Wax-soo-saarka Rx	Vo	300		850	mV
Waqtiga Kor u kaca iyo Waqtiga Dayrta ee Wax soo saarka Rx	Tr/Tf	30			ps	4
Qaladka LOS	V_{Khaladka LOS}	2		Vcc_MARTIGELIYE	V	5
LOS Caadi ah	V_{Heerka LOS}	Vee		Vee+0.8	V	5

Qoraalo:1. Si toos ah ayuu ugu xiran yahay biinanka gelinta xogta TX. Isku xidhka AC-ga ee biinanka ilaa darawalka laysarka IC.
2. SFF-8431 Rev 3.0 kasta.
3. Ku beddel joojinta kala duwanaanshaha 100 ohms.
4. 20%~80%.
5. LOS waa wax soo saar ururiya furan. Waa in la soo jiidaa iyadoo 4.7k – 10kΩ lagu dhejiyay guddiga martida loo yahay. Hawlgalka caadiga ah waa macquul 0; luminta calaamaduhu waa macquul 1. Danabka jiidista ugu badan waa 5.5V.

Halbeegyada Indhaha (TOP = 0 ilaa 70°C, VCC = 3.135 ilaa 3.465 Volts)

Halbeegga	Astaan	Ugu yaraan.	Caadi ah	Ugu badnaan.	Cutubka	Fiiro gaar ah
Qaybta Gudbiyaha:
Mowjadda Dhexe	λt	1290	1310	1330	nm
ballaca muuqaalka	△λ			1	nm
Celceliska Awoodda Indhaha	Pavg	-6		0	dBm	1
Awoodda Indhaha OMA	Poma	-5.2			dBm
Korontada Laysarka Dami	Poff			-30	dBm
Saamiga Dabar-goynta	ER	3.5			dB
Ciqaabta Kala-fidinta Gudbiyaha	TDP-ga			3.2	dB	2
Buuqa Xoogga Qaraabo	Rin			-128	dB/Hz	3
Dulqaadka Lumista Soo Celinta Indhaha		20			dB
Qaybta Qaataha:
Mowjadda Dhexe	λr	1260		1355	nm
Xasaasiyadda Qaataha	Sen			-14.5	dBm	4
Xasaasiyadda Cadaadiska leh (OMA)	Sen_ST			-10.3	dBm	4
Los Assert	LOS_A	-25		-	dBm
Macmacaanka Los	LOS_D			-15	dBm
Lumis La'aanta Jir-dilka	LOS_H	0.5			dB
Culays xad-dhaaf ah	Sabti	0			dBm	5
Muujinta Qaadaha	RRX			-12	dB

Qoraalo:1. Tirooyinka awoodda celceliska ah waa kuwo macluumaad leh oo keliya, sida ku cad IEEE802.3ae.
2. Tirada TWDP waxay u baahan tahay in guddiga martigeliyaha uu noqdo mid waafaqsan SFF-8431. TWDP waxaa lagu xisaabiyaa iyadoo la adeegsanayo koodka Matlab ee ku xusan qodobka 68.6.6.2 ee IEEE802.3ae.
3. 12dB milicsiga.
4. Xaaladaha tijaabooyinka qaataha ee walwalsan sida ku cad IEEE802.3ae. Tijaabada CSRS waxay u baahan tahay in guddiga martigeliyaha uu noqdo mid u hoggaansan SFF-8431.
5. Cabirka xad-dhaafka ah ee qaataha ee lagu qeexay OMA iyo xaaladda ugu xun ee walbahaarka leh.

Astaamaha Waqtiga

Halbeegga	Astaan	Ugu yaraan.	Caadi ah	Ugu badnaan.	Cutubka
Waqtiga Xaqiijinta TX_Demi	t_off			10	us
Waqtiga Diidmada TX_Disable	t_on			1	ms
Waa waqtigii la bilaabi lahaa Ku dar Dib-u-dejinta TX_FAULT	t_int			300	ms
TX_FAULT laga bilaabo Khaladka ilaa Xaqiijinta	t_fault			100	us
TX_Dilaal Waa waqtigii la bilaabi lahaa Dib-u-dejinta	dib u dajin	10			us
Lumitaanka Qaataha ee Waqtiga Xaqiijinta Calaamadaha	T_A,RX_LOS			100	us
Lumitaanka Qaadashada ee Waqtiga Calaamadaha Deassert	T_d,RX_LOS			100	us
Qiimee-Xulo Waqtiga Isbedelka	t_ratesel			10	us
Waqtiga Saacadda Aqoonsiga Taxanaha ah	saacad-taxane ah			100	kHz

Qeybinta Biinanka

Jaantuska Lambarka Biinanka iyo Magaca Xidhiidhiyaha Guddiga Martigelinta

Qeexitaannada Shaqada Biinanka

PIN-ka	Magaca	Shaqada	Qoraallo
1	VeeT	Dhulka gudbiyaha moduleka	1
2	Cillad Tx ah	Cilad gudbiye module ah	2
3	Dami Tx	Dami Gudbiyaha; Dami wax soo saarka laysarka gudbiyaha	3
4	SDL	gelinta/soo-saarka xogta ee is-dhexgalka taxanaha ah ee 2-fiilo (SDA)
5	SCL	gelinta saacadda is-dhexgalka taxanaha ah ee 2-fiilo ah (SCL)
6	MOD-ABS	Module-ka Maqan yahay, ku xidh VeeR ama VeeT module-ka dhexdiisa	2
7	RS0	Qiimee xulashada0, ikhtiyaar ahaan xakamee qaataha SFP+. Marka uu sarreeyo, heerka xogta gelinta >4.5Gb/s; marka uu hooseeyo, heerka xogta gelinta <=4.5Gb/s
8	LOS	Lumitaanka Tilmaamaha Calaamadaha ee Qaataha	4
9	RS1	Qiimee xulashada 0, si ikhtiyaari ah u xakamee gudbiyaha SFP+. Marka uu sarreeyo, heerka xogta gelinta >4.5Gb/s; marka uu hooseeyo, heerka xogta gelinta <=4.5Gb/s
10	VeeR	Goobta qaataha moduleka	1
11	VeeR	Goobta qaataha moduleka	1
12	RD-	Xogta la rogay ee qaataha la geliyay
13	RD+	Xogta qaataha ee aan la rogin ayaa la dhigayaa
14	VeeR	Goobta qaataha moduleka	1
15	VccR	Qalabka qaataha module-ka 3.3V
16	VccT	Qalabka gudbiyaha module-ka 3.3V
17	VeeT	Dhulka gudbiyaha moduleka	1
18	TD+	Xogta la rogay ee Gudbiyaha la geliyay
19	TD-	Xogta Gudbiyaha ee aan la rogin oo la soo saaray
20	VeeT	Dhulka gudbiyaha moduleka	1

Fiiro gaar ah:1. Biinanka dhulka ee moduleka waa in laga soocaa kiiska moduleka.
2. Biinkani waa biin furan oo soo saara/daadi ah waxaana kor loo soo jiidi doonaa iyadoo la adeegsanayo 4.7K-10Kohms ilaa Host_Vcc oo ku yaal guddiga martida loo yahay.
3. Biinkan waxaa kor loogu soo jiidi doonaa 4.7K-10Kohms ilaa VccT ee moduleka.
4. Biinkani waa biin furan oo soo saara/daadi ah waxaana kor loo soo jiidi doonaa iyadoo la adeegsanayo 4.7K-10Kohms ilaa Host_Vcc oo ku yaal guddiga martida loo yahay.

Macluumaadka iyo Maareynta EEPROM ee Module SFP

Modules-ka SFP waxay hirgeliyaan hab-maamuuska isgaarsiinta taxanaha ah ee 2-wire sida ku qeexan SFP -8472. Macluumaadka aqoonsiga taxanaha ah ee modules-ka SFP iyo xuduudaha Kormeeraha Baarista Dijital ah waxaa laga heli karaa iyada oo loo marayo I²Isku-xirka C ee cinwaanka A0h iyo A2h. Xusuusta waxaa lagu sawiray Shaxda 1. Macluumaadka aqoonsiga ee faahfaahsan (A0h) waxaa lagu taxay Shaxda 2, iyo tTilmaamaha DDM ee cinwaanka A2h. Wixii faahfaahin dheeraad ah ee khariidadda xusuusta iyo qeexitaannada baytka, fadlan tixraac SFF-8472, "Isku-xirka La Socodka Baaritaanka Dijital ah ee Transceivers-ka Indhaha". Xuduudaha DDM waxaa lagu hagaajiyay gudaha.

Shaxda1. Khariidadda Xusuusta Baaritaanka Dijital ah (Sharaxaad Gaar ah oo ku saabsan Goobta Xogta).

Shaxda 2aad- Tusmada Xusuusta EEPROM ee Aqoonsiga Taxanaha (A0h)

Cinwaanka Xogta	Dhererka (Byte)	Magaca Dhererka	Sharaxaadda iyo Tusmada
Goobaha Aqoonsiga Saldhigga
0	1	Aqoonsi	Nooca gudbiyaha taxanaha ah (03h=SFP)
1	1	La keydiyay	Aqoonsi dheerad ah oo nooca gudbiyaha taxanaha ah (04h)
2	1	Isku xiraha	Koodhka nooca isku xirka indhaha (07=LC)
3-10	8	Gudbiye-haye	10G Saldhig-LR
11	1	Cod-bixinta	64B/66B
12	1	BR, Magac ahaan	Heerka baud-ka ee magacaaban, cutubka 100Mbps
13-14	2	La keydiyay	(0000h)
15	1	Dhererka (9um)	Dhererka isku xirka waxaa loo taageerayaa faybarka 9/125um, cutubyo 100m ah
16	1	Dhererka (50um)	Dhererka isku xirka waxaa loo taageerayaa faybarka 50/125um, cutubyo 10m ah
17	1	Dhererka (62.5um)	Dhererka isku xirka ayaa loo taageeray faybar 62.5/125um ah, cutubyo 10m ah
18	1	Dhererka (Naxaasta)	Dhererka isku xirka ee loogu talagalay naxaasta, cutubyada mitirka
19	1	La keydiyay
20-35	16	Magaca Iibiyaha	Magaca iibiyaha SFP:Fiber VIP
36	1	La keydiyay
37-39	3	Iibiye OUI	Iibiyaha gudbiyaha SFP OUI ID
40-55	16	Iibiyaha PN	Lambarka Qaybta: "SFP+ -10G-LR” (ASCII)
56-59	4	Dib-u-habeyn Iibiye	Heerka dib-u-eegista lambarka qaybta
60-62	3	La keydiyay
63	1	CCID	Baytka ugu muhiimsan ee wadarta xogta ee cinwaanka 0-62
Goobaha Aqoonsiga ee La Kordhiyay
64-65	2	Ikhtiyaar	Waxay tilmaamaysaa calaamadaha SFP ee indhaha ee la hirgeliyay (001Ah = LOS, TX_FAULT, TX_DISABLE dhammaantood waa la taageeray)
66	1	BR, ugu badnaan	Heerka sare ee heerka bit, cutubyada %
67	1	BR, ugu yaraan	Heerka hoose ee heerka bit, cutubyada %
68-83	16	Iibiyaha SN	Lambarka taxanaha (ASCII)
84-91	8	Koodhka taariikhda	Fiber VIPKoodhka taariikhda wax soo saarka
92-94	3	La keydiyay
95	1	CCEX	Hubi koodka Goobaha Aqoonsiga ee la dheereeyey (cinwaanada 64 ilaa 94)
Goobaha Aqoonsiga Gaarka ah ee Iibiyaha
96-127	32	La akhrin karo	Fiber VIPtaariikh gaar ah, akhri oo keliya
128-255	128	La keydiyay	Waxaa loo qoondeeyay SFF-8079

Astaamaha Kormeeraha Baarista Dijital ah

Cinwaanka Xogta	Halbeegga	Saxnaanta	Cutubka
96-97	Heerkulka Gudaha ee Gudbiyaha	±3.0	°C
100-101	Hadda Laysarka ee Kala-soocidda	±10	%
100-101	Awoodda Wax Soo Saarka Tx	±3.0	dBm
100-101	Awoodda Gelinta Rx	±3.0	dBm
100-101	Danabka Bixinta Gudaha ee VCC3	±3.0	%

U hoggaansanaanta Sharciyeynta

TheSFP+ -10G-LR waxay u hoggaansan tahay shuruudaha iyo heerarka caalamiga ah ee ku habboonaanta Electromagnetic-ga (EMC) iyo badbaadada caalamiga ah (fiiri faahfaahinta Jadwalka soo socda).

Dheecaanka Elektrostatic-ka ah

(ESD) biinanka korontada ku shaqeeya

MIL-STD-883E

Habka 3015.7

Fasalka 1aad(>1000 V)

Dheecaanka Elektrostatic-ka ah (ESD)

ilaa Duplex LC Receptacle

IEC 61000-4-2

GR-1089-CORE

La jaan qaadaya heerarka

Elektromagnetic

Faragelinta (EMI)

Qaybta 15aad ee FCC Fasalka B

EN55022 Fasalka B (CISPR 22B)

Fasalka VCCI ee B

La jaan qaadaya heerarka

Badbaadada Indhaha ee laysarka

FDA 21CFR 1040.10 iyo 1040.11

EN60950, EN (IEC) 60825-1,2

La jaan qaadaya laser-ka Fasalka 1aad

badeecad.

Wareegga lagu taliyay

Wareegga Korontada ee Guddiga Martigelinta ee lagu taliyay

Wareegga Interface-ka Xawaaraha Sare ee lagu taliyay

Xogta Farsamada:

Dhererka faybarka	1.0mama La Habeeyey
Nooca Isku-xirka	SC,LC, FC ama La Habeeyey
Nooca Fiberka Indhaha	G652DG657A1 ama La Habeeyey
Toosinta (dB) Ugu yaraan *	55
Lumista Soo Celinta (dB) Ugu Yar *	55 (50)
Maareynta Awoodda (mW)	300
Mowjadda Hawlgalka (nm)	1260 ~ 1650
Heerkulka Hawlgalka (°C)	-40 ~ +85
Heerkulka Kaydinta (°C)	-40 ~ +85